TestPro Multifunction Cable Certifier

Test More. Test Faster. Test for Less.

TestPro is an affordably priced purpose-built tester designed to ensure the modern digital network infrastructure is fully qualified to support the demands of IoT connected devices.

Overview

TestPro Awards FamilyThe changing landscape of enterprise cabling demands more from the test equipment you rely on. TestPro Multifunction Cable Certifier is a versatile solution purpose-build, to quickly and easily ensure infrastructure readiness across smart building technologies in a cost effect way. TestPro offers the most expansive feature set of any other test equipment available to provide you with test capability across broad network typology.

Certify twisted pair cable for CAT5e – CAT 8 Level IIG
TestPro supports testing and certification for network deployments up to
40 Gigabit Ethernet for Cat 5e, 6, 6A, 7, 8 or Class I/II cabling system. The
electrically centered test plug assures the Level 2G/VI accuracy required to
support field testing to Cat 8 / Class I/II, and actually exceeds the 2000 MHz
requirement, to offer a 3000 MHz platform. As a result, you can feel confident
in results over the full frequency range.

Certify Singlemode and Multimode fiber optic cable
Integrated voltmeter validates hybrid powered fiber
Integrated visual fault locator (VFL) identifies breaks in the link

Validate PoE

TestPro Excels at validation PoE with a comprehensive set of test function including RealPower load testing, with support for 802.3 af/at/bt, UPoE 
 
Qualify Multi-Gigabit link speed up to 10GigE
Using a Signal to Noise Ratio (SNR) measurement while under both traffic and PoE load if a PSE is present, see per pair link speed detail and available headroom.
 
Validate Wired and Wireless Network Connectivity
In-depth network troubleshooting capabilities and in Moves/Adds/Changes and include switch detail, ping, traceroute, signal strength and much more.
 

Visit our Straight-Talk Blog for more insights.

Find out Where to Buy

Request at free personalized virtual demo by contacting us at CustomerCare@AEM-Test.com to discuss how TestPro could help your organization with testing needs.

TestPro Network Topology Diagram v5

Advantages

  • Copper Cable Certification Testing – TestPro CV100 has a sophisticated RF measurement engine, able to support up to 3GHz frequency range. TestPro supports all mode combination parameters (including TCL), and exceeds the level 2G accuracy specifications for copper certification testing.
  • Single Pair Ethernet (SPE) –  TestPro supports testing of SPE cable with hot swappable test adapters
  • Fiber Optic Certification Testing – TestPro’s fiber optic measurements provide Tier-1 certification per industry standards as well as customizable limits for both Multimode and Singlemode Fiber Optic premise cabling. Additionally, these adapters include an integrated VFL to provide a quick indication of a break in the wire, as well as an integrated connection port for measuring electrical voltage for hybrid powered fiber applications in support of smart building initiatives.
  • Fiber Optic End Face Inspection – Dirty connectors are most common cause for fiber optic link underperformance. The fiber inspection feature of TestPro allows you to check the cleanliness of fiber end faces in both installation and troubleshooting environments.
  • Scalable and flexible – The TestPro 100 comes with optional detachable adapters that enable a wide variety of test functions to cater to the needs of today’s network infrastructures, as well as to easily scale to cater for future requirements.
  • Autotest feature – Autotest is the easiest way to ensure that cabling links will support the desired network rate. It is also fast at 6 seconds including all optional test parameters such as TCL, ELTCL, DC Resistance Unbalance, and more.
  • PoE testing – The AD-NET-CABLE adapter provides comprehensive testing for verifying PoE deployments. It supports all PoE standards including 802.3 af/at/bt and UPOE for reporting of PSE configurationand snf full load testing with reporting of Current/Wattage/Voltage. In addition, it also allows for sustained loading of the PoE source over longer periods to identify hard to find intermittent power drops, through external loads.
  • Multi-gig Link Speed Qualification – TestPro is capable of validating a link to ensure Ethernet can be supported at 1/2/5/5/10GBASE-T. It can perform SNR measurements while under traffic and PoE load, ensuring confidence that a cabling link will support the desired network rate.
  • Network Connectivity Testing – TestPro can connect to a live Ethernet network through the 10/100/1000 network interface connector, or via WiFi (Edimax EW-7822ULC Wi-Fi USB adapter required). Once connected, TestPro will auto-discover connected devices on the network. You can Ping any other device to verify connectivity with traceroute and measure latency.
  • Wi-Fi Testing – TestPro can auto-discover all 2.4GHz and 5GHz Wi-Fi SSIDs and their associated RSSI values (received power level). This is helpful in discovering Wi-Fi “dead zones” and checking Wi-Fi connectivity with optional Edimax EW-7822ULC Wi-Fi USB Adapter.
  • Industry’s Best Warranty – All TestPro CV100’s come with a full 2-year warranty from date of purchase – double what competitors offer and proof of our confidence in the quality and reliability of our instruments.
 

Products

TestPro Product Kit Comparison Guide

Let us help you decide which TestPro Kit is right for you with this product kit comparison guide. You can read more detail about each kit further down this page.

TestPro Product Selection Guide Image

 

TestPro Kit Configurations

Standard Components Included in All TestPro Kits

  • Two TestPro Platforms
  • Certificates of Calibration
  • USB Flash Drive with TestDataPro PC software
  • Carrying Case/s
  • Two Wiring Rack Hanging Straps
  • Quick Start Guide
  • USB Cable
  • Power Adapters with region-specific pins

TESTPRO CV100-K61

The K61 combines both cable certification and network connectivity testing. It is used by System Integrators, Network Owners or Cable Contractors looking to add new service offerings. This kit provides both Copper and Fiber Optic certification, PoE load testing, and Multi-gigabit link speed testing. Wired and Wireless network testing is supported with included AD-NET-CABLE Adapter. Wireless testing requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.

Test Adapters Added with Standard Components:

  • Set of AD-CAT6A-CH Channel Adapters
  • Set of AD-CAT6A-PL Permanent Link Adapters
  • Set of AD-NET-CABLE Adapters for PoE and Multi-Gigabit
  • Set of AD-SM-01 SingleMode Fiber Optic Adapters
  • Set of AD-MM-01 MultiMode Fiber Optic Adapters
K61 4398 2

TESTPRO CV100-K60

The K60 combines both cable certification and network connectivity testing.  It is used by System Integrators, Network Owners or Cable Contractors looking to add new service offerings. This kit provides Copper certification, PoE load testing, and Multi-gigabit link speed testing. Wired and Wireless network testing is supported with included AD-NET-CABLE Adapter. Wireless testing requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.

Test Adapters Added with Standard Components

  • Set of AD-CAT6A-CH Channel Adapters
  • Set of AD-CAT6A-PL Permanent Link Adapters
  • Set of AD-NET-CABLE Adapters for PoE and Multi-Gigabit
K60 4408 2

TESTPRO CV100-K51

The K51 is used by Cable Contractors. This kit provides both Copper and Fiber Optic certification.  Wireless testing is supported and requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.

Test Adapters Added with Standard Components:

  • Set of AD-CAT6A-CH Channel Adapters
  • Set of AD-CAT6A-PL Permanent Link Adapters
  • Set of AD-SM-01 SingleMode Fiber Optic Adapters
  • Set of AD-MM-01 MultiMode Fiber Optic Adapters
K51 4400 2

TestPro CV100-K50

The K50 is used by Cable Contractors. This kit provides certification.  Wireless testing is supported and requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.

Test Adapters Added with Standard Components:

  • Set of AD-CAT6A-CH Channel Adapters
  • Set of AD-CAT6A-PL Permanent Link Adapters
K50 4410 2

TestPro CV100-K30

The K30 combines both cable certification and network connectivity testing. It is used by System Integrators, Network Owners and Front-line Technicians. This kit provides view only Copper certification test results, PoE load testing, and Multi-gigabit link speed testing. Wired and Wireless network testing is supported with included AD-NET-CABLE Adapter. Wireless testing requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.

Test Adapters Added with Standard Components:

  • Set of AD-NET-CABLE Adapters for PoE and Multi-Gigabit
K30 4413

TESTPRO CV100-K11

The K11 is used by Cable Contractors. This kit provides Fiber Optic certification. Wireless testing is supported and requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.

Test Adapters Added with Standard Components:

  • Set of AD-SM-01 SingleMode Fiber Optic Adapters
  • Set of AD-MM-01 MultiMode Fiber Optic Adapters
K11 4402

TestPro CV100-K05

The K05 has two primary use models.  The first is that it is used by Front-line technicians for basic cable continuity testing and validation of link speed up to 1Gig through the integrated RJ-45 port on the side of the TestPro platform.  The second is the K05 is used as an expansion test platform companion for our large kits, such as the K61, and K60 to allow more technicians to test simultaneously by using test adapters from the large kits. Wireless testing is supported and requires an optional Edimax EW-7822ULC Wi-Fi USB Adapter.

*It is important to note that adapters used for cable certification testing where saving and printing of reports is required, those test adapters must remain with original platforms due to licensing requirements.

K05 4415

Adapters and Licenses

AD-SM-K01E

Singlemode Fiber Adapter Test Kit.

Kit contains:

  • Carry case
  • Pair of Singlemode fiber adapters with dual wavelength light source 1310/1550nm and integrated visual fault locator and volt meter
  • Interchangeable FC connectors for the transmit ports
  • FC-LC launch cords for connecting the transmit port to the fiber link under test
  • Interchangeable LC adapters for the receive ports
  • Pair of LC-LC reference cords for the receive side
  • One LC-LC duplex coupler for setting reference
  • Certificate of calibration
  • Sticklers cleaning kit
  • Carry case

AD-MM-K01E

Multimode Fiber Adapter Test Kit

Kit contains:

  • Carry case
  • Pair of Multimode fiber adapters with dual wavelength light source 850/1300nm and integrated visual fault locator and volt meter
  • Interchangeable FC adapter for the transmit ports
  • Pair of FC-LC launch cords for connecting the transmit port to the fiber link under test
  • Interchangeable LC adapters for the receive ports
  • Pair of LC-LC reference cords for the receive side
  • One LC-LC duplex coupler for setting reference
  • Certificate of calibration
  • Sticklers cleaning kit
  • Carry case

AD-NET-CABLE

A pair of Multi-gig SNR testing and PoE testing adapter for TestPro CV100.

AD-CAT6A-CH

A pair of CAT6A channel test adapter for TestPro CV100

AD-COAX-KT

A pair of Coax adapters for TestPro CV100

AD-CAT6A-PL

A pair of CAT6A permanent link adapter for TestPro CV100

ACC-6A-PL-PLUG

A pair of Field replaceable centered plugs for AD-CAT6A-PL

AD-M12-X

A pair of M12 X-coded adapters for TestPro CV100

AD-5e-PCORD

A pair of patch-cord test adapters for testing CAT5e patch-cords using TestPro CV100

AD-6-PCORD

A pair of patch-cord test adapters for testing CAT6 patch-cords using TestPro CV100

AD-6A-PCORD

A pair of patch-cord test adapters for testing CAT5e patch-cords using TestPro CV100

AD-8.2-TERACH

A pair of patch-cord test adapters for testing CAT6 patch-cords using TestPro CV100

AD-8.2-TERAPL

A pair of CAT 8.2 TERA permanent link adapters for TestPro CV100

AD-8.2-GG45CH

A pair of CAT 8.2 GG45 channel adapter for TestPro CV100

AD-8.2-GG45PL

A pair of CAT 8.2 GG45 permanent link adapters for TestPro CV100

OP-CAT6A

CAT6A cable certification testing license for TestPro CV100

UP-K05-K50

Upgrade kit from TestPro CV100- K05 to TestPro CV100-K50

Kit contains:

  • OP-CAT6A Software license code for enabling CAT6A certification testing.
  •  A pair of AD-CAT6A-CH channel adapters.
  •  A pair of AD-CAT6A-PL permanent link adapters.

UP-K30-K60

Upgrade kit from TestPro CV100- K30 to TestPro CV100-K60

Kit contains:

  • OP-CAT6A Software license code for enabling CAT6A certification testing.
  •   A pair of AD-CAT6A-PL permanent link adapters

ACC-POWER-AD

2 Pack of power supplies with interchangeable plugs for worldwide use.

ACC-SOFT-CASE

ACC-HARD-CASE

Capabilities

Copper Certifier Autotest

TestPro’s certifier Autotest is a one-button operation that performs all tests required for TIA/ISO standards compliance, in addition to other parameters such as TCL (Transverse Conversion Loss). TestPro also provides comprehensive DC measurements including both pair-to-pair and wire-to-wire resistance unbalance tests. The Autotest also reports distance-to-fault plots based on NEXT and Return Loss time-domain measurements. And all of the tests are performed in 6 seconds for CAT6A channel or permanent link.

Autotest results are saved to memory and can be transferred to the included TestDataPro results management software for collaboration, documentation and reporting.

CAT6A Autotest Summary

Single-Pair Ethernet

The use of Single-pair Ethernet (SPE) is growing fast for connecting IoT sensors and other devices. TestPro is the first and the only cable certifier enabling testing of Single-pair Ethernet systems. TestPro also allows specifying limits for SPE based on current IEEE specifications.

SPE Screen Shots

Fiber Certifier Autotest

TestPro’s fiber optic measurements provides Tier-1 certification according to industry standards, as well as customizable limits for both Multimode and Singlemode Fiber Optic premise cabling. Additionally, these adapters include an integrated VFL to provide a quick indication of a break in the wire, as well as an integrated connection port for measuring electrical voltage for hybrid powered fiber applications in support of smart building initiatives.

For deployments where powered fiber is being used, TestPro’s fiber adapter provides not only certification of the fiber optic cable but also provides you with the ability to validate electrical voltage on the adjacent copper wire in this hybrid cable type. This allows you to measure the electrical input voltage going into a PoE extender that is supplying PoE to end devices, and is a convenience for the technician to have everything needed for testing at their fingertips. Combine that with TestPro’s ability to measure actual PoE load (requires AD-NET-CABLE adapter) and you have a powerful solution with a unique set of capabilities that will allow you to verify or troubleshoot across various points in the network typology.

Fiber End Face Inspection

Dirty connectors are one the major problems in fiber optics, causing high connector losses and reflectance. The Fiber Inspection feature of TestPro allows users to check the fiber connectors for contaminants before testing and installation. TestPro has built-in USB Video Class (UVC) drivers than can support any USB Fiber Inspection Scope or Fiber Microscope that uses the UVC driver. Below are examples of clean and dirty end faces taken with this function.

Live Wiremap

Studies have shown that a large percentage of all cabling faults are related to miswiring. Both main and remote units of TestPro graphically report the end-to-end wiremap instantaneously when a connection is detected. After getting instant view of the wiring fault, the technician can find the location of the fault simply by clicking the wiremap picture. And after resolving the issue, TestPro’s Live Wiremap reporting helps to verify the fix instantly. In addition to 6-seconds CAT6A Autotest, this is another important productivity improvement feature of TestPro.

Power over Ethernet (PoE)

TestPro provides the most comprehensive test functionality for verifying PoE deployments. UPoE and all PoE standards are supported, which include 802.3at/af/bt. The PoE source is tested with actual load connection. TestPro offers the unique ability to test internal and external load test over a sustained time period to validate the maximum power a PoE device can support. TestPro will also check that the cable installation meets the required power to turn on a PoE devices. If users want to test end to end connection wit a midspan, enable AC Wiremap function.

In addition to operational tests on PoE, the tester enables characterization of cabling links for DC Resistance Unbalance parameters in accordance with the latest TIA 1152A standard for certification testing.  This can be done as a one off test, or included in a cable certification test by using the test parameters noted with a “+/++”.  This does NOT increase test time.  The complete Autotest including all standards certification test parameters in addition to added parameters is still 6 seconds for CAT6A! 

When performing a PoE test, a remote tester is not needed as you are testing directly into the switch. In this case, you may convert your Remote tester into a Main under Setting/Device Type and deploy each tester individually to perform these tests.

PSE detection

Voltage: Voltage drawn by the PD

PSE Type: 1-2, 2, 3-4, and 4 –different types have different allocated power

PD Class: 0-8 –different classes have different allocated power

PoE Cable airs: Cable pairs used to transmit electrical power

Allocated Power: Power allocated for the PD

Real Power: Power when internal load is used

Internal and External Load Tests:

Voltage

Current

Real Power: The power consumed when TestPro uses internal component to test the actual power coming out of the PoE device.

DC Unbalance

When a cable is used for PoE, it is important to ensure that DC resistance of all wires is closely matched. Differences of resistance between pairs, or between wires within a pair can cause degradation in RF performance, or excessive heating. TestPro’s 6-second autotest includes full characterization of DC resistance parameters, including all combinations of loop resistance, pair-to-pair resistance unbalance, and wire-to-wire resistance unbalance.

TCL

While the RF field test parameters mandated by TIA and ISO adequately confirm the cable’s standalone performance, more testing is needed to confirm the immunity of the cable in presence of external electromagnetic interference (EMI). EMI is caused by alien crosstalk from adjacent cables, noise from wireless communications systems, or even vehicles driving nearby. TCL (transverse conversion loss) which is a measure of how well the wires constituting a cabling pair are matched and is an important parameter to confirm the EMI immunity of the cable. TestPro measures and reportes TCL from both ends in every Autotest without requiring additional measurement time. That means, a 6-second CAT6A Autotest includes TCL measurement. By default, TCL is reported as an information-only measurement and not included in pass/fail result.

Long Cable Test

Industrial networks and some cross campus links use longer cable lengths than the 100m specifications from TIA or ISO. IEEE has started a new project to specify parameters for long cables including long single-pair cables. TestPro is the only cable certifier that has the capability to test cables as long as 1,000 m (1 km). For long cables, the RF performance at lower frequencies is very important. TestPro measures RF parameters down to 100 kHz or 0.1 MHz (as against 1 MHz for other cable certifiers).

RL Locator

An ideal network cable pair has 100 ohm impedance along the entire length. In reality, the impedance varies from 100 ohm in different amounts along the cabling link, the deviation being more significant at the positions of connectors. RL locator plot provides a view of the cable along its length. The locations of peaks in the RL Locator are representative of spots with poor impedance control. When a cable fails autotest, the RL locator helps determine the location along the cabling link that is most likely to have caused failure. This is a great aid for trouble-shooting. With accurate location information of the problem spot, a technician can focus on fixing the issue on that part of the cable.

RL Locator1

NEXT Locator

NEXT failures can be difficult to diagnose. They can be due to faulty cable, faulty connectors, or poor installation practices. The NEXT locator plot provides a view of NEXT in the cable along its length. When a cable fails autotest, the NEXT locator helps determine the location along the cabling link that is most likely to have caused failure. Typically you will the highest NEXT at a connection point, but sometimes if you see NEXT is high all along the cable, that is the culprit. With NEXT Locator, NEXT failures soon turn into NEXT passes!

In the traditional enterprise network installation, the primary objective was to provide cabling channel from the computers in the work-area to the telecom room. This is almost always achieved with:

•permanent link consisting of wall-mount jacks at both ends of the cabling

•Patch-cords to connect networking end-points to wall-mount jacks at both ends, wherein the entire cabling including the patch-cords (but not the plugs at the end-point connections) is referred to as channel.Increasingly, the networking end-points are devices other than computers, and connecting them calls for adaptation in cabling topology. Devices such as IP security cameras have built-in jack for network connection. In order to cater to installation of these devices, a new topology is now accepted by the standardization bodies. This new topology, Modular Plug Terminated Link (“MPTL”) is a variation of permanent link where one of the ends is terminated into a plug. In order to test MTPL links using TestPro, attach a CAT6A permanent link adapter to the main TestPro unit and a Cat6/CAT6A patch-cord adapter to the remote TestPro unit (you can also interchange these adapters between the main and remote units). Now perform a standard permanent link test or using a vendor-suggested customised limit. Note: Optional adapters neededAD-6A-PCORD and AD-6-PCORD adapter pairs.

TestDataPro

TestDataPro is a PC based test reports management software that comes standard with all models of TestPro Multifunction Cable Tester. TestDataPro works in tandem with TestPro, which allows you to define projects and categorize test results into logical groupings once uploaded into the database. The database provides you with the ability to collaborate by viewing in-depth test details on-line as well as provide .pdf based printed reports. If you want to combine multiple Autotests into a single report, such as Cat6A, Multi-Gig and PoE.

Wireless Network Connectivity Testing

TestPro’s auto-discovery will display all detected SSIDs and their associated RSSI (received power level). This is useful in determining if the WiFi network to which a customer is trying to connect has sufficient signal to a specific location.

  • Determine WiFi “dead zones” by checking the RSSI in various locations.
  • Connect to any SSID using the appropriate credentials for that network.
  • Use Ping to verify point-to-point connectivity or out to the Internet by selecting pre-defined or custom website URLs and see latency details.
Network Connectivity Testing
  • Useful for moves/adds/changes/troubleshooting, NSA will connect to a live network either through the built-in 10/100/1000 or when through the AD-NSA adapter that comes with the NSA and connecting to the Multi-gig network interface. Users can also connect via wireless using an optional Edimax WiFi USB adapter (EW-7822ULC). Once NSA is connected, the auto-discovery feature displays connected devices on the network. Ping any other device on the local network or the internet to determine connectivity and latency.
  • See switch detail including Slot/Port/VLAN and VLAN usage detail
  • Display list of IP & MAC addresses for connected devices. Useful for identify devices, including unknown devices attached to network.
  • Select any IP address to view that device details, MAC address, and more.
  • View Local Area Network details such as Gateway, Subnet Mask, DHCP Server.
  • Use Ping to verify point-to-point connectivity or out to the Internet by selecting pre-defined or custom website URLs and see latency details.
  • Traceroute is useful in determining if internet connection latency is within the local network or beyond.
  • Network Autotest includes the network discovery, connected devices, network map, ping and LAN speed.
  • WiFi SSID/RSSI discovery, Signal Strength Test with options for Auto Connect, WiFi Handoff enable/disable with editable RSSI threshold for handoff provides the ability to find weak spots in coverage and confirm handoff behavior throughout the coverage area.

Note: The Edimax WiFi USB adapter EW-7822ULC is regional specific and should be purchased from Amazon or preferred retailer.

TestPro validates a cabling link for high performance Ethernet standards including 1 / 2.5 / 5 / 10GBASE-T. End-to-end Signal to Noise Ratio (SNR) measurement provides a quick and objective assessment of link performance under network load condition. The Autotest feature of the TestPro is the easiest way to ensure that a cabling link will the desired network rate.

Wireless access points (APs) are one of today’s most broadly deployed IoT devices and 802.11ac Wave 2 wireless APs require 2.5 and 5 GigE backbone speeds to run at maximum performance. Additionally, these devices can be PoE powered and by the nature of the link speed, require all four pair to be terminated. TestPro can certify the cabling infrastructure in accordance with TIAstandards, verify link speed in accordance with IEEE 8023.bz specific to 1 / 2.5 / 5 / 10GigE, and verify loaded PoE++ in accordance with IEEE 802.3bt to 90W including DC resistance measurements.

AEM is a member of the NBASE-T Alliance, to learn more visit https://www.nbaset.org/technology/

Multigig 2

Switch Detail
Switch detail support both CDP and LLDP, and gives you immediate detail on the switch you have directly connected to from a given jack location. This provides a quick understanding of proper connectivity and configuration. Port capabilities indication is useful to understand if connectivity problems you may be troubleshooting are due to an unsupported link speed.
VLAN Discovery
VLAN discovery provides complete visibility into all discovered VLANs including percentage of observed traffic. This is yet another tool in the arsenal to aid in troubleshooting and during moves, adds, and changes.

Videos

These videos provide product demonstrations, general product overviews and related technology tutorials.

Specifications

TestPro CV100 Platform Specifications

  • Lithium Ion
  • 3.7v
  • 13,200 mah
  • Approximate Test time : 8hrs (based on 200 tests per day)
  • Charging time : 7hrs
  • Linux
  • TestDataPro PC Based Software
  • TestDataPro Cloud
  • 10/100/1G test port 
  • USB flash type A
  • Micro USB
  • USB cable
  • 60-pin high-frequency connector
  • Rated for 5000 insertion cycles
  • Hot swappable
  • 5V, 3A (supplied)
  • 5-12V (supported)
  • 2.1mm DC Jack

# For a detailed list of test specifications used by various Test Adapters, please see the product datasheet.

TestDataPro

Results Management Software

  • TestDataPro offers both cloud and PC based options, and come standard with all models of TestPro and NSA.
  • TestDataPro PC based
    • Allows you to define projects and categorize test results into logical groupings.
    • Provides multiple reporting formats and options such as a single summary report or full reporting.
    • Allows software based re-certification if original test was done with wrong test standard selected
  • TestDataPro Cloud
    • Allows immediate offload of test results to database via wired or wireless connection
    • Allows visual of pass/fail results
    • Allows printing of single .pdf reports
TDP Cloud TestPro 2.9.R3
TestDataPro Cloud
TDP TestPro 2.9.R3
TestDataPro PC Based